Meteor ProMover 575 User Manual

1 PROMOVER 575 USER MANUAL / OPERATION INSTRUCTION MLSC, Inc. P.O. Box 578, Madison, Al 35758P.O. Box 578, Madison,

10 CH 10 IRIS 0 - 255 IRIS OPEN TO CLOSE CH 11 LAMP 0 - 5 LAMP ON (Delay after 10 minutes) 200 - 210 LAMP OFF (after 5 second) CH.12 SPEED 0

11 1- Pan Mode Positive: Normal operation: When you press the Pan1 and Pan2, their starting off point of Pan will be

12- We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. - Never use alcohol or solvents! - The lens has to be r

2PROMOVER 575 DMX-Scanner: INTRODUCTION Thank you for having chosen METEOR-KLS PROMOVER 575. You will see you have acquired a powerful and versat

3- During the initial start-up some smoke or smell may arise. This is a normal process and does not necessarily mean that the device is defective.

4USER MANUAL: ProMover 575 DMX-Scanner - Yoke Fixture Keep this manual for future needs! Put it in a place that you can access it if needed. Tabl

5DESCRIPTION OF THE DEVICE: Features: • Innovative Professional scanner with rotating gobos • 16 different, dichroic color filters and white •

6Lamp adjustment - The lamp holder is aligned at the factory. Due to differences between lamps, fine adjustment may improve light performance. -

7If you have doubts concerning the safety of a possible installation, DO NOT install the device. Before rigging make sure that the installation area

8Caution: At the last fixture, the DMX-cable has to be terminated with a terminator. Solder a 120-ohm resistor between Signal (-) and Signal (+) in

9 PROMOVER 575 CHANNELS CH. 1 COLOR 0 - 7 WHITE 8 - 15 PINK 16 - 23 YELLOW 24 - 31 BLUE 32 - 39 ORANGE 40 - 47 GREEN 48